Automatic Water Stills from 1/2 GPH to 10 GPH

Specifications

Model
No.
Capacity/Hr.

 Gallons    Liters

KW Voltage Weight
(lbs.
net)
Ht. Width Depth Clear
for
Dome
Feed
Water
Connection
(pipe size)
181 H 1/2 1.89 2 110, 220 26 28" 13" 141/2" 12" 1/8"
181 J 1 3.78 3 110/220 28 28" 13" 141/2" 12" 1/8"
181 E 1 3.78 3 110/220 36 28" 13" 141/2" 12" 1/8"
181 F 11/2 5.67 41/2 220 36 28" 13" 141/2" 12" 1/8"
777 EL 3 11.35 9 220/440 175 48" 20" 24" 12" 1/4"
777 1E 5 18.92 14 220/440 268 39" 20" 241/2" 12" 3/4"
777 2E 10 37.85 26 220 250 51" 20" 231/2" 12" 3/4"
Simplicity of Operation
water distillersThe simplicity of Water Distillers Automatic Water Stills is based on a superior design plus years of refinement by experienced engineers. By reducing the number of process steps as well as the number of parts to an absolute minimum, an exceptional degree of simplicty has been achieved which is unequalled by other stills producing water of comparable purity. Check for yourself:
  1. Cold water enters outer tube and is preheated by the steam descending in the inner tube.
  2. The preheated water is then vented to dissipate dissolved gases before it passes to the boiling chamber.
  3. In the boiling chamber, the water is boiled gently so that entrainment of spray in the steam is virtually eliminated.
  4. Triple vapor baffle prevents any particles that might be entrained in the steam from entering the condenser tube.
  5. The steam passing down the tube is condensed to pure distilled water by the cold water entering the system.
  6. Feed water flow regulator is standard on all models.
Attachments
  • Low Water Cutoff on Models 171 H & J, 1E & 2E
  • Fully Automatic Stop-Start-Flushing Controls

Water Distillers